Shop by Category

Shopping Information

We Accept: Visa, MasterCard, American Express (no surchage)

SSL Certificate

GPS Trip Meter GT1000C

  • GPS Trip Meter GT1000C

    GPS Trip Meter GT1000C GPSTR1000C

    GPS Trip Meter GT1000C

    Powerful Performance. Designed for harsh automotive environments, the module features a tough fascia with integrated buttons and LCD graphics display. An adjustable screw or suction mount allows for optimum positioning for the operator. As well as that, it’s almost 100% accurate and will record the correct distance to within 1 metre.
    The ability to track 50 satellites simultaneously, enhanced receiver sensitivity and active antenna result in fast time-to-first-velocity-calculation as well as the ability to operate in the harshest RF environments such as canyons and cities. Speed errors will occur in RF blackout zones such as tunnels. Distance lost due to RF blackout is compensated for by adding it to the total distance recorded once satellites become visible again.
    Three dimensional velocity calculations are typically accurate to 0.36km/h and are updated 10 times per second. In application measurements of distance have typically resulted in accuracies of better than 0.25% over 1km. For best accuracy, the vehicle should be moving at a speed of greater than 2km/h.
    Two trips are displayed simultaneously as well as current speed and the number of satellites currently being used. Trip statistics such as average speed, maximum speed and trip time can be viewed via the integrated menu. The display is highly visible both at night and in sunlight due to the use of an industrially rated, trans reflective graphics LCD display.
    An external switch is provided that allows reset of trip "A" when pressed. Optionally, a freeze function can be enabled so that trip A freezes instead of resetting when the switch is pressed. The trip distance continues to be calculated, whilst the display is frozen and will be displayed as soon as freeze is released by pressing the switch again. If the external switch is pressed and held for 5 seconds, trip A will reset. The integrated keypad and menu allows for customisation of these and other functions.
    The unit is provided with a 1.5m power cable terminated in a standard automotive cigarette-lighter connector. An external magnetic-mount antenna is included. A bulkhead-mount antenna is available for use in permanent installations.
    Performance Specifications:
    Speed range:
    Update rate:
    Accuracy, horizontal:
    Accuracy, altitude:
    Accuracy, velocity:
    Acquisition, after loss of lock:
    Acquisition, first time power applied:
    Acquisition, temporary loss of power:
    Operational limits, altitude:
    Operational limits, velocity:

    Minimum 2km/h; maximum 999km/h (or mi/h)
    50 channel tracking receiver
    < 5m (50%), < 8 (90%)
    < 10m (50%), < 16 m (90%)
    < 0.06m/sec = 0.22km/h
    < 2s (90%)
    < 38s (50%), < 42s (90%)
    < 10s (50%), < 13s (90%)
    Electrical Characteristics:
    Input voltage:
    Power consumption:
    9V to 36V
    1.2W (100mA @ 12V), including antenna
    Physical Characteristics:
    Antenna cable length:

    110mm (width), 80mm (height), 30mm (depth); face 82mm wide
    51mm (L), 42mm (W), 14mm (H)
    Environmental Specifications:
    Operating temperature:
    Storage temperature:

    -40°C to +85°C
    -55°C to +105°C
    5% to 95% R.H. non condensing at 60°C
    RF interface:
    SMA (compatible connector supplied with antenna)
    Bulkhead-mount GPS Antenna option available
    Package Contents:
    1 x GPS 1000C GPS Trip Meter
    1 x GPS Antenna - Magnetic/SMA
    1 x wiring loom – handheld reset switch, car power adapter, integrated fuse
    1 x RAM 1“ diameter ball mount
    1 x RAM suction cup base