Search

Search

Shop by Category

Shopping Information

We Accept: Visa, MasterCard, American Express (no surchage)

SSL Certificate

Spectra HL700 Laser Receiver with Rod Clamp

  • Spectra HL700 Laser Receiver with Rod Clamp

    Spectra HL700 Laser Receiver with Rod Clamp SPHL700

    The HL700 Laser Receiver features a digital readout of elevation that provides a numeric display range of 102mm. The readout is displayed on the large front and rear LCD's and shows exactly how far the elevation is from ongrade. Accurate measurements can be made without moving the rod clamp, saving time and increasing productivity. Selectable units of measure can be displayed meeting your application -mm, cm, ft, in or fractional inches.
     
    A 12.7cm reception height, more than double the industry standard, allows quick acquisition of the laser beam. An anti-strobe sensor prevents false readings from site strobe lights.
    The laser receiver is designed to survive the tough construction site conditions, it is totally waterproof and can withstand a drop of 3 metres onto concrete. The HL700 offers a 3 year warranty.
    The HL700 can be used as either a hand-held or rod mounted receiver for a wide range of applications.
    Features:
    - Digital readout of elevation - not only will high or low arrows be displayed, but the exact distance
      from grade will be numerically displayed, which eliminates the need to get "on-grade" to make
      measurements large 12.7cm reception height acquires the beam quickly and makes it easily to
      stay in the beam.
    - Anti-strobe sensor stops construction strobe lights from setting off the receiver, and makes it
      easier to identify true laser beam signals. Simultaneous elevation LED's signal in low light levels
      and over a longer range for easier reading in poor light conditions.
    - New CAPTURE function remotely captures and retains a measurement when display is difficult
      to see multiple deadband setting allows adaption to meet all your job site requirements.
    - Dust and weatherproof housing withstands a drop of up to 3m onto concrete for reduced
      downtime.
    - Two clamp positions for cut/fill or excavation. Excavation mode puts more reception height
      and elevation information above grade for higher utilisation in digging and staking applications. 
    Specifications:
    Working Radius
    Laser Detection Height
    Numeric Readout Height
    Internal Radio
    Radio Working Radius
    Accuracy (Deadband)    
     
     
     
     
     
    Reception Angle
    Detectable Spectrum
    Beeper Volumes
    LED Grade Indicators
    Power Supply
    Battery Life
    Automatic Shut Off
    Environmental
    Weight without Clamp
    Dimensions without Clamp
    Operating Temperature
    Storage Temperature
     
    1m - 460m (Laser dependent)
    127.0mm
    102.0mm
    Full 2-way communication, operation and security lock with paired device
    Up to 80m, depending on orientation, conditions and paired device
    - Ultra Fine 0.5mm
    - Super Fine 1.0mm
    - Fine 2.0mm
    - Medium 5.0mm
    - Coarse 10.0mm
    - Calibration 0.1mm
    +/- 45° minimum
    610nm, 780nm, (HL750), 520nm, 780nm (HL750U)
    Loud=110 dBA, Medium=95dBA, Low= 65dBA
    Front, Green on-grade, Red Hi, Blue Low
    2 x 1.5 Volt "AA" batteries
    60+ hours
    Selectable 30min, 24h, Off
    Waterproof, Dustproof to IP67
    371g
    168 x 76 x 36mm
    -20°C - +60°C
    -40°C +70°C
    Included:
    - HL700 Receiver
    - Receiver clamp
    - 2x AA Batteries
    - Multi Language Manual 

     

    $665.50 (AUD inc GST)