Search

Search

Shop by Category

Shopping Information

We Accept: Visa, MasterCard, American Express (no surchage)

SSL Certificate

Home › Products › Instruments › Moisture Meters › Tramex MRH III Moisture & Humidity Meter

Tramex MRH III Moisture & Humidity Meter

  • Tramex MRH III Moisture & Humidity Meter

    Tramex MRH III Moisture & Humidity Meter

    The Tramex MRH III moisture and humidity Meter is a pocket-sized, non-destructive, digital hand-held electronic impedance moisture meter. Incorporating 3 modes of operation, this is the complete instrument for moisture and humidity testing. Suitable for water damage, flooring, restoration, indoor air quality, pest control, home inspection. 
    Features:
    - Digital, non-destructive moisture meter.
    - Specific gravity adjustment for most wood species.
    - Deep signal penetration up to over 1" into the materials being tested without the need
      to damage the surface.
    - External rubber electrodes make direct contact with the material being tested for best
      sensitivity and repeatability.
    - Wide range of readings for wood of 5% to 30% and 0 to 100 comparative for all other
      materials.
    - Large, clear, easy to read display
    - Hold function enables user to "freeze" the reading. Useful for taking readings when the
      meter face is not visible.
    - Switch-able "On" or "Off" audio warning tone.
    - Automatic power cut-off switches "Off" when not in use.
    - Automatic default to last user setting when switched back on.
    - Battery operated (included).
    pdf brochure
    Optional: Tramex Hygro-i2 Probe & Tramex Hygro-i2 Electronic Interface Cable to suit MRHIII
    The Tramex Hygro-i2® relative humidity probe is the most advanced, resilient and reusable RH probe on the market today, allowing the user to perform in situ and hood type RH testing to comply with ASTM F2170 for the ?ooring industry, and is ideal for use by Flood & Water Damage Restoration and Indoor Air Quality professionals. The speed and accuracy of the Tramex Hygro-i2® probes set them apart from all other RH probes on the market. The con?dence in knowing you are testing with the best and fastest RH probe, together with the MRHIII brings reliability and peace of mind in concrete moisture meters to a whole new level.
     
    Features:
    - Fast acclimation time
    - Reusable Hygro-i2® Relative Humidity sensors prove to be the lowest cost per ASTM F2170 test
    - Best in class accuracy, even at high RH >90%
    - Proven robustness, durability and reliability
    - Accurate, durable and best in class
    - Testing per ASTM F2170, giving in situ relative humidity and ambient RH, temperature, dew point
      temperature & grains per pound
    - Relative Humidity range: 0% to 100%
    - Fastest Temperature response time
    - Best temperature accuracy of +/-0ºC to 90 ºC
    - Temperature Range: -40°C to 80°C
     
    The Hygro-i2® probe provides measurements of relative humidity, temperature, dew point and grains per pound in structural materials such as concrete ?ooring and walls, as well as the ambient conditions within the building envelope, all shown simultaneously on one clear display.

    The Hygro-i2® probes are reusable, paying for themselves after a few uses compared to single-use, disposable RH probes. Calibration checks can be carried out using the calibration check salts.
    Relative Humidty Sensor Specifications:
    Range: 0 to 100%RH
    Accuracy: 0% to 99%RH ±2.0%RH (@ 25ºC)
    Resolution: 0.1% over the complete range
    Drift: <0.25%RH per year
    Temperature Sensor Specifications:
    Range: -40ºC to 125ºC
    Accuracy: ±0.1ºC
    Range 20°C to 60°C (±0.1 °C)
    Sensor Protection: PTFE Film protects sensor opening
    from water & dust Drift: <0.04ºF (0.03ºC) per year NIST
    traceable. (National Institute of Standards and
    Technology)
     
    The RHIE2 Electronic Interface cable
    connects the Hygro-i2® RH probes to
    the MRH3.
     
    Optional: Tramex Hand-held Wood Pin Probe
    Heavy-duty Pin-type Wood Probe with cable and TP30 Pins. RCA type plug connection for
    use with MRH3
    Purchase options:
    The MRHIII Moisture & Humidity Meter Unit only,
    MRHIII Moisture & Humidity Meter Unit with the RHIE2 Interface cable & 1x Hygro-i2 probe,
    MRHIII Moisture & Humidity Meter Unit with the RHIE2 Interface cable & 3x Hygro-i2 probes,
    MRHIII Moisture & Humidity Meter unit with the RHIE2 Interface cable & 12x Hygro-i2 probes,
    MRHIII Moisture & Humidity with the Heavy-duty pin-type Wood Probe & Cable
    Tramex MRHIII unit only
    TRMRHIII
    $978.00 (AUD inc GST)
    Tramex MRHIII unit, Cable & 1x Probe
    TRMRHIIICP1
    $1,338.00 (AUD inc GST)
    Tramex MRHIII unit, Cable & 3x Probes
    TRMRHIIICP3
    $1,658.00 (AUD inc GST)
    Tramex MRHIIII unit, Cable & 12x Probes
    TRMRHIIICP12
    $2,823.00 (AUD inc GST)
    Tramex MRHIII unit, Handhelf Wood Pin Probe & Cable
    TRMRHIIIWP
    $1,233.00 (AUD inc GST)